mgmtsvlanid

This parameter specifies the S-VLAN for management traffic on this

 

interface. It is applicable only in stacked-VLAN Mode. Non-zero value of

 

this field is valid only if either 'etherIfIpAddress' field is non-zero or

 

'etherUseDhcp' field is true. If no management S-Vlan id is specified (in

 

the create operation) or its value is set to zero (either in create or modify

 

operation), then the system shall use the value of 'psvlanid' associated

 

with the bridge port created on this interface as the management VLAN

 

id. In case the management VLAN (virtual VLAN mapped to S-VLAN and

 

C-VLAN for the frame) does not exist (ie. Virtual VLAN mapped to

 

'mgmtsvlanid' or the associated 'psvlanid', if 'mgmtsvlanid' is zero) on the

 

system, then IP-based management shall not happen on the interface till

 

the corresponding virtual-VLAN is created with the Net-side port as its

 

member.

 

 

Type : Create - optional

 

Modify - optional

 

Valid values: 0 - 4095

 

 

m2vmacdbid

This field specifies the M2VMac Database Id associated with this

 

interface. The value 0 means Virtual MAC feature is disabled on this

 

interface. This field can be modified only when the interface is disabled.

 

Type: Create - optional

 

Modify - optional

 

Valid values: 1 -GS_CFG_MAX_M2VMAC_DATABASES

 

 

mgmttvlanid

This specifies the value to be used for inserting TVLAN id or vlan id of

<mgmttvlanid-val>

the third Vlan tag in the transmitted Ethernet frames and that is expected

 

in received frames over this interface. Currently this is configurable and

 

supported only for management Ethernet interface. For data Ethernet

 

interface, the value of TVLAN id is configurable and used from the

 

system sizing table. If the value for TVLAN id configured on a

 

management Ethernet interface is zero then third vlan tag shall not be

 

added neither shall it be supported in received frames. This attribute is

 

applicable only in stacked-VLAN mode.

 

Type: Create --

Optional

 

Modify

-- Optional

 

Valid values: 0 - 4095

 

Default value: 0

 

 

 

 

Example:

create ethernet intf ifname eth-0 ip 192.168.1.1 mask 255.255.255.0 speed 100bt profilename sprofile mgmtvlanid 2 priority 2 trfclassprofileid 1 Ctlpktinstid 1 ctlpktgroupid 1

IP DSLAM

323