5.25.2System Configuration Save and Restore Commands
5.25.2.1Commit
Description:
Use this command to commit the active configuration to the flash. This command is not supported
Command Syntax:
commit [nbsize]
Parameters:
None
Example:
$ commit
Output:
Set Done
Caution:
This command will take some time to execute.
References:
reboot command Download command.
5.25.2.2 Reboot
Description:
Use this command to reboot the system and to set the boot configuration.
Command Syntax:
reboot [control <nvramnetwork>] [dataplane <nvramnetwork>] [config <network default last backup clean minimum safe >]
IP DSLAM | 595 |
|
|