diffdelaytolupstrm | The maximum differential delay among member links in a bonding group in |
Upstream direction. Type: Create － Optional | |
| Modify － Optional |
| Valid values: 0 |
| Default value: 4 |
|
|
diffdelaytoldnstrm | The maximum differential delay among member links in a bonding group in |
downstream direction. Type: Create － Optional | |
| Modify － Optional |
| Valid values: 0 |
| Default value: 4 |
|
|
asmprotocol Enable | This parameter specifies whether Autonomous Status Messages will be |
Disable | exchanged between CO and CPE. If it is disabled then the group would be |
| bonded statically and CO would assume CPE to know all the configuration |
| parameters like SID format, number of links in the bonded group and the |
| links participating in bonding. If it is enabled then CO would inform all these |
| parameters to CPE using Autonomous Status Messages. |
| Type: Create － Optional |
| Modify － Optional |
| Default value: enable |
|
|
sidformat EightBitSid | SID Format: 8 bit or 12 bit SID. Only 8 bit format is being supported |
TwelveBitSid | Type: Create － Optional |
| Modify － Optional |
| Default value: 1 |
|
|
maxrxbitrateratio | The maximum bit rate ratio among member links in a bonding group in |
upstream direction. | |
| Type: Create － Optional |
| Modify － Optional |
| Valid values: 1 |
| Default value: 4 |
|
|
linkhecthrshld | HEC Error percentage of the link upstream rate which will act as Threshold |
for link to be part of group in Rx direction | |
| Type: Create － Optional |
| Modify － Optional |
| Valid values: 1 |
| Default value: 2 |
|
|
numoflinksupforgrpup | This field specifies the number of links required to be up for bonding to start |
One All | ASM protocol |
| Type: Create － Optional |
| Modify － Optional |
| Default value: 0 |
|
|
IP DSLAM | 123 |
|
|