Valid values: 0 - 7

 

 

psvlanid

Port service Vlan Index, the Service VLAN ID assigned to

<psvlanid-val> none

frames received on this port. This is applicable only to

 

Non-Provider ports. The value zero here means that this field

 

is not applicable. psvlanid and ctosprofileid both can be

 

non-zero. But they both can not be zero. In case of bridge

 

port on PPPoE and IPoE interfaces psvlanid value must be

 

non-zero, ctosprofileid is ignored for such a port. For other

 

bridge ports† psvlanid value can be zero. If both psvlanid

 

and ctosprofileid have non-zero value for such ports, the

 

ctosprofileid shall be applied and psvlanid shall be ignored

 

Type: Modify － Optional

 

Valid values: 0 - 4095

 

 

ppstatus enable

This specifies if the port is a provider port or a Non-Provider

disable

port as per Vlan stacking model. This field is applicable only

 

in Vlan stacking scenario. The modification of this parameter

 

is allowed only when the bridge port is disabled. If the value

 

of this field is enable i.e the port is a provider port, then

 

Priority of the incoming C-Vlan tag is kept preserved

 

irrespective of gsvSVlanCvlanQosPreserveMode of the

 

Svlan to which the packet belongs to.

 

Type: Modify － Optional

 

 

ctosprofileid

This specifies the CtoS profileId for the Vlan Map profile

<ctosprofileid-val>

associated† with this interface. Value zero for this means no

none

CtoS profile associated with this port.† psvlanid and

 

ctosprofileid both can be non-zero. But they both can not be

 

zero. In case of bridge port on PPPoE and IPoE interfaces

 

psvlanid value must be non-zero, ctosprofileid is ignored for

 

such a port. For other bridge ports† psvlanid value can be

 

zero. If both psvlanid and ctosprofileid have non-zero value

 

for such ports, the ctosprofileid shall be applied and psvlanid

 

shall be ignored.

 

Type: Modify － Optional

 

Valid values: 0 -4

 

 

Example:

$ get gvrp port info portid 10

IP DSLAM

651