Planet Technology IDL-2400, IDL-2401, IDL-4800, IDL-4801 pid, pid, tname, nodeid, brtype, nodeid, brtype, brtype, childpid, Description:, Description:, Description:, Command Syntax:, Command Syntax:

	because of this node.
SBVar Index	This specifies setbase variable index. This field is valid only if
	'SetBaseType' is 'SetFromVar'. 'L2Start' is read-only containing
	Layer 2 header start offset. 'L3Start' is read-only containing
	Layer 3 header start offset. It should be ensured that packet is IP
	packet before using 'L3Start' value
Node Priority	This specifies the priority of profile node. Based on this priority
	value, the profile node is created in fast or slow memory. In case
	priority is specified as 'AsInTree', node priority will be same as
	specified in the tree.

5.13.10Clfr tree branch Commands5.13.10.1Get clfr tree branch

Description:

Use this command to get.

Command Syntax:

get clfr tree branch [tname <tname-val>] [pid <pid-val>] [nodeid <nodeid-val>] [brtype <brtype-val>]

5.13.10.2 Create clfr tree branch

Description:

Use this command to create.

Command Syntax:

create clfr tree branch tname <tname-val>pid<pid-val>nodeid<nodeid-val>brtype<brtype-val>childpid<childpid-val>

5.13.10.3 Delete clfr tree branch

Description:

Use this command to delete.

Command Syntax:

create clfr tree branch tname <tname-val>pid <pid-val>nodeid

<nodeid-val>brtype<brtype-val>

IP DSLAM 355