
| Protocol | configure to build a specific protocol stack automatically. This field is | 
| 
 | meaningful only when autostatus flag as enable. In case of conflict with | 
| 
 | autoSupportedProtocols, its value will override. | 
| 
 | 
 | 
| Auto Sense Trigger | This field specifies at what time autodetection of Encapsulation type or | 
| Type | higher protocol layers is to be done - all the time or only when Operational | 
| 
 | Status of ATM VC is changed to UP. If its value is 'dynamic', then detection | 
| 
 | can happen anytime a packet is received. If its value is 'opstatechange', | 
| 
 | then autodetection happens only when Operational status of ATM VC | 
| 
 | changes to UP. This field is not valid if encaptype is Ethernet. | 
| 
 | 
 | 
| Auto Curr Sensed | This field specifies the current sensed Encapsulation type in case the | 
| Encaps Type | Encapsulation type is being autodetected. The value of this field will be the | 
| 
 | same as the field 'AAL5 Encapsulation Type' if the Encapsulation type is | 
| 
 | preconfigured. This is a read only field for all agents, except for the Auto | 
| 
 | Sense Agent. | 
| 
 | 
 | 
| Ctl Pkts Group Id | The Control packet instance group associated with this VC. The flows for | 
| 
 | this interface shall be mapped to control packet instances as mapped for | 
| 
 | the flows corresponding to the groupid configured in ctrlpkt group info | 
| 
 | command. If this group does not have entries for some of the flows, then | 
| 
 | those flows shall be mapped to the ctlpktinstid of ATM port, for which this | 
| 
 | VC is being created. If the group id is 0, then all the flows shall be mapped | 
| 
 | to ctlpktinstid of ATM port, for which this VC is being created. | 
| 
 | 
 | 
Caution:
The specified lower interface should exist. Please refer to the create atm port command.
References:
zATM interface commands
zATM statistics commands
zATM OAM commands
zATM VC statistics commands.
| 170 | IDL series User Guide | 
| 
 | 
 |