VC Type | : PVC | VC Topology | : Point to Point |
Max simultaneous protocol | : 1 |
| |
Auto Status |
| : Disable |
|
Auto Supported Protocol | : pppoa eoa |
| |
Auto VC Mux Forced Protocol : None |
| ||
Auto Sense Trigger Type | : dynamic |
| |
Auto Curr Sensed Encaps Typee : none |
| ||
Ctl Pkts Group Id |
| : none |
|
Auto Supported Protocol : pppoa eoa |
| ||
Output Fields: |
|
|
|
Field | Description |
| |
|
|
|
|
VC IfName | VC Interface Name. It can be : |
| |
|
| ||
Low IfName | Interface Index of the ATM port, on which this VC is getting configured. | ||
|
| ||
VPI | Virtual Path Identifier. In order to modify, the VPI value shall be the new | ||
| VPI value and the admin status of VC interface shall be disabled. Also, the | ||
| VPI and VCI value cannot be modified along with admin status in one | ||
| command. If encaptype is Ethernet than value of this field has to be 0. | ||
|
| ||
VCI | Virtual Circuit Identifier. In order to modify, the VCI value shall be the new | ||
| VCI value and the admin status of VC interface shall be disabled. Also, the | ||
| VPI and VCI value cannot be modified along with admin status in one | ||
| command. If encaptype is Ethernet than value of this field has to be 0. | ||
|
| ||
Oper Status | This specifies the actual/current state of the interface. It can be either Up | ||
| or Down |
|
|
|
| ||
Admin Status | This specifies the desired state of the interface. It may be either Up/Down. | ||
|
| ||
Aal5 Tx Size | This specifies the transmit CPCS SDU size to be used. | ||
|
| ||
Aal5 Rx Size | This specifies the receive CPCS SDU size to be used. | ||
|
| ||
Aal Type | This specifies the AAL type in use for this VC. The only type of AAL | ||
| supported in Columbia Packet is AAL5. This field is not valid for an ATM | ||
| VC with encaptype as Ethernet. |
| |
|
| ||
Aal5 Encap | This specifies the data encapsulation method to be used over the AAL5 | ||
| SSCS layer. "auto" means autosense the muxType(llc/vc). Auto mode is | ||
| only used to sense the llc/vcmux . Atm VC with encaptype as ethernet can | ||
| be created only over an ATM port which has value of atmtransporttype as | ||
| packet.The VPI/VCI values for this atm vc shall be 0/0. aaltype, | ||
| mgmtmode and oam related parameters are not valid for an ATM VC with | ||
| encaptype as Ethernet. |
| |
|
| ||
channel | This extension specifies the type of channel on which the ATM VC's cells | ||
| have to be transmitted/received. This field is deprecated and currently | ||
| not in use. |
|
|
|
|
|
|
168 | IDL series User Guide |
|
|