| Optional |
| Modify － Optional |
| Default value: "\0" |
|
|
priority | Priority to be set for packets matching this rule. This field is valid |
| only if RuleAction is 'setprio' or 'retagprio'. If the RuleAction is |
| 'setprio' then this value is internal priroity and is used along with |
| egress port traffic class mapping table, to determine the output |
| queue. If the RuleAction is 'retagprio' then this value is priority which |
| is to be tagged into the outgoing packet and it is also used along with |
| egress port traffic class mapping table, to determine the output |
| queue. This field can be modified only if 'status' has the value |
| 'disable'. |
| Type: Create － Optional |
| Modify － Optional |
| Valid values: 0 - 7 |
| Default value: 0 |
|
|
status enable disable | Admin status of the rule |
| Type: Create － Optional |
| Modify － Optional |
| Default value: disable |
|
|
statsstatus enable | Admin status of rule statistics. Statitics of a rule are collected only |
disable | when this field is set to 'enable'. This field can be modified only if |
| 'status' has the value 'disable'. NOTE - Statistics may not reflect |
| correctly the number of egress mcast, bcast and unknown unicast |
| packets hitting the rule. |
| Type: Create － Optional |
| Modify － Optional |
| Default value: disable |
|
|
ruleprio low high | Tells the priority of the rule. Based on this priority value, the rule is |
| created in fast or slow memory. This field can be modified only if |
| 'status' has the value 'disable'. This field is ignored if the 'ruleAction' |
| has value 'clfrdef' |
| Type: Create － Optional |
| Modify － Optional |
| Default value: high |
|
|
ruledir in out | Specifies whether the rule will be applied on incoming interfaces |
| (ingress)or outgoing interfaces(egress). |
| Type: Create － Optional |
| Default value: in |
|
|
IP DSLAM | 385 |
|
|