5.6.9.4 Modify bridge static ucast

Description:

Use this command to modify.

Command Syntax:

modify bridge static ucast vlanid <vlanid-val>ucastaddr <ucastaddr-val>

[portid <portid-val>]

Parameters:

Name

Description

 

 

vlanid <vlanid-val>

The VLAN index referring to this VLAN. In case of device

 

capability not supporting vlans, vlan id "0" is a valid value.

 

VLAN here means the 802.1q Vlan in case of Native Vlan mode

 

and Virtual Vlan in case of Stacked Vlan Mode.

 

Type: Create － Mandatory

 

Delete － Mandatory

 

Modify － Mandatory

 

Get － Optional

 

Valid values: 0 - 4095

 

 

ucastaddr

The destination unicast MacAddr to which filtering info applies.

<ucastaddr-val>

Type: Create － Mandatory

 

Delete － Mandatory

 

Modify － Mandatory

 

Get － Optional

 

 

portid <portid-val>

The set of ports, for which a frame with a specific unicast

 

address will be flooded in the event that it has not been

 

learned. It also specifies the set of ports a specific unicast

 

address may be dynamically learnt on. This list shall have only

 

the CPE side ports. Currently only one port can be set in this

 

list. Type: Create － Optional

 

Modify － Optional

 

Valid values:1-386

 

 

Example:

$create bridge static ucast vlanid 1 ucastaddr 1:1:1:1:1:1 recvport 0 portid 2 status 1 cfgmode Config

IP DSLAM

193