applicable.

 

 

McastVlan CTag

This parameter specifies the Multicast CVlanId to be used. Two

 

special values of this parameter are supported in stacked mode:

 

One value (4097) to signify that repot/leave shall be forwarded to

 

querier with the C tag with which it was received from the

 

subscriber port and the S tag specified in multicast Vlan's

 

definition One value (0) to signify that report/leave shall be

 

forwarded to querier with S tag specified in multicast Vlan's

 

definition and no C tag. Other Value shall signify that,

 

report/leave shall be forwarded to querier with S and C tag

 

specified in multicast Vlan's definition.

 

 

PortList

This parameter specifies the list of ports on which a given

 

combination of (Group Address, Source Address, VlanId) maps

 

to a specified multicast vlan (STag, CTag)

 

 

5.14.3Igmpsnoop port info Commands5.14.3.1Get igmpsnoop port info

Description:

Use this command to get.

Command Syntax:

get igmpsnoop port info [portid <portid-val >]5.14.3.2 Modify igmpsnoop port info

Description:

Use this command to modify.

Command Syntax:

modify igmpsnoop port info portid portid [ status Enable Disable ]

[ leavemode Normal Fast FastNormal ] [ pktpriority <pktpriority-val> none ] [ maxgrpallowed <maxgrpallowed-val> ] [ querierstatus Enable Disable ]

[ mcastvlanstatus Enable Disable ] [ nomatchaction Drop Transparentlyforward Learn ]

IP DSLAM

455