enabledisable

Administrative status of the interface.

 

Type: Optional

 

Valid values: enable or disable

 

 

Example:

$ create ipoa intf ifname Ipoa-0 lowif aal5-0 configstatus Normal enable

Output:

Verbose Mode On

Entry Created

Ifname

: Ipoa-0

Low IfName : aal5-0

Config Status : Normal

 

Oper Status

: Up

Admin Status : Enable

Verbose Mode Off:

 

Entry Created

 

 

Output Fields:

 

 

 

FIELD

 

Description

 

 

 

 

 

Ifname

 

The Ipoa Interface

 

 

 

 

Low IfName

This specifies the name of the lower AAL5

 

 

 

interface.

 

 

 

 

Config Status

This mode describes the configuration status for

 

 

 

this interface. If the "config" bit is set then this

 

 

 

interface shall be created but will have a dormant

 

 

 

status. Only after the receipt of an Ipoa packet

 

 

 

from CPE side this interface shall become active.

 

 

 

The "In-Use" and "Not-In-Use" bits are read only

 

 

 

bits. The "Not-In-Use" indicates that the entry is

 

 

 

dormant and "In-Use" indicates that the entry is

 

 

 

activated.

 

 

 

 

Admin Status

Administrative status of the interface.

 

 

 

 

Oper Status

Operational status of the interface.

 

 

 

 

IP DSLAM

477