Bert Sync

Indicates whether the Signal is in Sync or not.

Select Information Valid

Indicates the information validity for the SELT operation conducted on the Xcvr.

Select Loop Length

Indicates the LOOP Length in Feet once when the SELT information is valid on

the Xcvr.

 

Select Loop End

Indicates whether the loop is short or open once when the SELT information is

valid on the Xcvr.

 

Select Loop Gauge

Indicates the LOOP wire gauge information once, when the SELT information is

valid on the Xcvr.

 

Select the port ID from the DSL Port drop-down list to view a specified DSL’s physical Layer

Info. Click on to close the window.

3.9.2 Channel Layer Info

Allow users to view the Channel layer information of a specified DSL port from the IP DSLAM. Double Click on “Channel Layer Info” from the Function List Window. The Channel Layer Info window appears.

Field

Definition

Interleave delay

Interleave delay for this channel. (milli-seconds)

Previous TX rate

Previous actual transmit rate on this channel if ADSL loop retain. (kbps)

Current TX rate

Actual transmit rate on this channel. (kbps)

CRC block length

The length of the channel data-block on which the CRC operates.

Current Atm Status

Indicates the current ATM Status.

Rs Symbols

Indicates the number of DMT symbols per Reed-Solomon code word (S),

in the downstream direction.

 

Rs Depth

Indicates interleaving depth (D), in the downstream direction.

Rs Redundency

Indicates the number of redundant bytes (R), per Reed-Solomon code in

the downstream direction

 

Select the port ID from the DSL Port drop-down list view a specified DSL’s channel Layer

Info. Click on to close the window.

IP DSLAM

71