5.13.6Clfr namedlist map Commands5.13.6.1Get clfr namedlist map

Description:

Use this command to get.

Command Syntax:

get clfr namedlist map [ifname <interface-name>]5.13.6.2 Create clfr namedlist map

Description:

Use this command to create.

Command Syntax:

create clfr namedlist map ifname <interface-name>listid <listid-val>5.13.6.3 Delete clfr namedlist map

Description:

Use this command to delete.

Command Syntax:

delete clfr namedlist map ifname <interface-name>

Parameter:

Name

Description

 

 

 

 

 

 

 

ifname <interface-name>

This specifies the eoa ,pppoe, ipoe or ethernet interface to which

 

named generic list is attached. Valid values for the field are between

 

EOA-0 and EOA-23 or between eth-0 and eth-1or between IPOE-0 and

 

IPOE-191 or between PPPOE-0 and PPPOE-192.

 

Type:

Create

--

Mandatory

 

 

Delete

-- Mandatory

 

 

Get

--

Optional

 

 

listid <listid-val>

This field stores the list identifier value.

 

Type:

Create

--

Mandatory

 

Valid values: 1 - 65535

 

 

 

 

 

Example

$ create clfr namedlist map ifname eoa-1 listid 2

IP DSLAM

341