5.7.3 Bridge mcast fwdunreg Commands5.7.3.1 Get bridge mcast fwdunreg

Description:

Use this command to get.

Command Syntax:

get bridge mcast fwdunreg [vlanid <vlanid-val>]5.7.3.2 Modify bridge mcast fwdunregDescription Syntax:

Use this command to modify.

Command Syntax:

modify bridge mcast fwdunreg [vlanid <vlanid-val>] [egressports

<egressports-val> none] [forbidegressports <forbidegressports-val> none]

Parameters:

Name

Description

 

 

vlanid <vlanid-val>

The VLAN id for this VLAN. In devices supporting "Shared Vlan

 

for multicast" capability, the information for a multicast MAC

 

address is shared across VLANS. Hence, vlanid is not required

 

and is passed as zero. In devices supporting "Independent Vlan

 

for multicast" capability. Each vlan can have its own information

 

for a multicast MAC address. Hence, VLAN id is a mandatory

 

parameter and a valid value of vlanid must be passed. For No

 

Vlan case VLAN id is not required. When Vlan transparency

 

feature is supported, the valid range for vlanid also includes

 

4097. In case of "Shared Vlan Multicast also there shall always

 

be a seperate entry for 4097 if the VLAN with that VLAN Id is

 

created. VLAN here means the 802.1q Vlan in case of Native

 

Vlan mode and Virtual Vlan in case of Stacked Vlan Mode.

 

Type: Modify － Optional

 

Get － Optional

 

Valid values: 0 - 4095

 

 

egressports

The set of ports, configured by management, in this VLAN, to

<egressports-val> none

which multicast group-addressed frames for which there is no

 

more specific forwarding information, are to be forwarded. More

 

than one value can be given, separated by spaces.

 

 

214

IDL series User Guide