a. Select the VLAN to view or modify by using the VLAN ID drop-down list.

b. Use Egress PVC and Untagged PVC drop-down list to set the specified DSL port’s Egress PVC and Untagged PVC.

c. Click on to submit your settings or click on to close the VLAN Configuration window.

3.7.2 Ethernet

Allow user to view and modify Ethernet configuration. Double Click on “Ethernet” from the Function List Window. The Ethernet Configuration window appears as follows.

Field

Definition

DHCP

DHCP client enabled or disabled

Type

Uplink or Downlink

Admin Status

The desired state of UPLINK (enable/disable)

Operation Status

System is enabled or not.

IP address

IP address of the UPLINK

Mask

The network mask of the UPLINK.

Gateway

Gateway IP

 

VLAN for management traffic on this interface. Nonzero value

 

of this field is valid only if either 'ip' field is non-zero or 'usedhcp'

 

field is true. If no Management Vlanid is specified (in the create

 

operation) or its value is set to zero (either in create or modify

Mgmt Vlan Index

operation) then the system shall use the value of 'portvlanid'

associated with the bridge port created on this interface as the

 

Management Vlan Index. In case the management vlan (i.e.

 

'mgmtvlanid' or the associated 'portvlanid', if 'mgmtvlanid' is

 

zero) doesn't exist on the system then management shall not

 

happen on this interface till the corresponding VLAN is created

 

with the Net side port as its member.

IP DSLAM

63