5.11.2Ethernet Commands

5.11.2.1Create ethernet intf

Description:

Use this command to create a physical Ethernet interface.

Command Syntax:

create ethernet intf ifname <interface-name> [ip <ip-address>] [mask <net-mask>][usedhcp truefalse] [speed {auto100BT1000BT}] [type uplinkdownlink][enable disable] [pkttype McastBcastUnknownUcastAllNone] [orl decvalue][duplex half fullauto] [profilename <profilename-val>] [mgmtvlanid <mgmtvlanid-val>] [priority <priority-val>] [trfclassprofileid <trfclassprofileid-val> ] [Ctlpktinstid <ctlpktinstid-val>] [ ctlpktgroupid <ctlpktgroupid-val> none ] [mgmtsvlanid <mgmtsvlanid-val>] [m2vmacdbid <m2vmacdbid-val> none] [ mgmttvlanid <mgmttvlanid-val> ]

5.11.2.2 Delete ethernet intf

Description:

Use this command to delete a physical Ethernet interface.

Command Syntax:

delete ethernet intf ifname <interface-name>

5.11.2.3 Get ethernet intf

Description:

Use this command to get information about a particular physical Ethernet interface, or about all the interfaces.

Command Syntax:

get ethernet intf [ifname <interface-name>]

5.11.2.4 Modify ethernet intf

Description:

Use this command to modify physical Ethernet interface configuration.

Command Syntax:

modify ethernet intf ifname <interface-name> [ip <ip-address>] [mask <net-mask>][usedhcptruefalse] [speed {auto100BT1000BT}] [type uplinkdownlink][enable disable] [pkttype McastBcastUnknownUcastAllNone] [orl decvalue][duplex half fullauto] [profilename <profilename-val>]

318

IDL series User Guide