specified with subrules having cmptype as innamedlist or notinnamedlist. It can only be used for mapping to create genlist of an interface.

Value TypeThis field specifies the value type of list. Value type should match value type of subrule field for which comparsion type is innamedlist or notinnamedlist. It should be 'U32' in case a rule containing IP subrule or Generic subrule with comparision type (srcaddrcmp / gencmp) as 'ingenlist' or 'notingenlist' is attached on same interface. Currently only 'U32' value is supported.

5.13.19Filter namedlist map Commands5.13.19.1Get filter namedlist map

Description:

Use this command to get.

Command Syntax:

get filter namedlist map [ifname <interface-name>]5.13.19.2 Create filter namedlist map

Description:

Use this command to create.

Command Syntax:

create filter namedlist map ifname <interface-name>listid <listid-val>5.13.19.3 Delete filter namedlist map

Description:

Use this command to delete.

Command Syntax:

delete filter namedlist map ifname <interface-name>

Parameter:

NameDescription

ifname <interface-name> This specifies the eoa ,pppoe, ipoe or ethernet interface to which named generic list is attached. Valid values for the field are between EOA-0 and EOA-23 or between eth-0 and eth-1or

IP DSLAM

377