IP Dest Addr Mask

The mask value for destination ip address. The mask is applied over the

 

destination ip address before checking against a value.

 

 

Subrule Priority

This specifies the priority of the subrule. Based on this priority value, the

 

subrule is created in fast or slow memory. In case priority is specified as

 

asinrule, subrule priority will be same as specified in the rule.

 

 

Transport Header

This specifies the type of Transport header in the packet in which IP is

 

being transported. If value of this field is ethernet (1), then IP is being

 

carried in ethernet header and if it is pppoe (2) then then IP is being carried

 

in PPP header.

 

 

TOS Mask

The mask value for TOS field. The mask is applied over the TOS field value

 

before checking against configured values in 'tosfrom' and 'tosto'.

 

 

References:

zGeneric filter commands

5.13.33Filter subrule PPP Commands5.13.33.1 Get Filter subrule ppp

Description:

Use this command to get.

Command Syntax:

get filter subrule ppp [ruleid <ruleid-val>] [subruleid <subruleid-val>]5.13.33.2 Create filter subrule ppp

Description:

Use this command to create.

Command Syntax:

create filter subrule ppp ruleid <ruleid-val> subruleid <subruleid-val> [prototypefrom <prototypefrom-val>] [prototypeto <prototypeto-val>] [prototypecmp eq neq lt leq gt geq any inrange exrange] [subruleprio low high asinrule]

5.13.33.3 Delete filter subrule ppp

Description:

Use this command to delete.

436

IDL series User Guide