Description:
Use this command to reset some parameters of netbuf. This command will reset the following parameters of netbuf.
zSet ThresholdCount value to zero.
zSet AllocFailCount value to zero
zSet WaterMark to the number of net buffers currently used by system.
zSet FreeFailCount value to the zero.
Command Syntax:
reset rmon netbuf
Parameters:
None
Example:
$ reset rmon netbuf
Output Field:
None
5.22.6RMON Semaphore Info Commands5.22.6.1Get rmon semaphoreDescription:
Use this command to get the information about all the semaphores present in the system.
Command Syntax:
get rmon semaphore
Parameters:
None
Example:
$ get rmon semaphore
IP DSLAM | 579 |
|
|