Output:

Verbose Mode On

Entry Created

Interface

: eth-0

 

 

 

Type

: Uplink

UseDhcp

: False

IP Address

: 192.168.1.1

Mask

: 255.255.0.0

Pkt Type

: Mcast

 

 

 

Orl(mbps)

: 100

 

 

 

Configured Duplex

: Auto

Duplex

: None

Configured Speed

: Auto

 

 

 

Profile Name

: SPPROFILE

 

 

 

Mgmt VLAN Index

: 2

 

 

 

Mgmt S-VLAN Index

: 2

 

 

 

Mgmt T-VLAN Index

: 2

 

 

 

Tagged Mgmt PDU Prio: 2

 

 

 

trfclassprofileid : 1

 

 

 

 

 

Ctl Pkts Instance Id:1

Ctl Pkts Group Id : 1

Speed

: -

 

 

 

Operational Status

: Down

Admin Status

: Up

Verbose Mode Off:

 

 

 

 

 

Entry Created

 

 

 

 

 

Output field:

 

 

 

 

 

 

Field

 

Description

 

 

 

 

 

 

 

 

 

 

 

If-Name

 

This parameter specifies the interface index used for the

 

 

 

 

Ethernet type of interfaces. Valid Values starts from eth-0

 

 

 

 

and continues to eth-*

 

 

 

 

 

 

 

 

Type

 

This parameter specifies the type of the Ethernet interfaces.

 

 

 

 

The Net is towards the NET side (2 at most) and slave

 

 

 

 

means the physical interface connected to the slave device.

 

 

 

 

 

 

 

UseDhcp

 

This parameter specifies whether a DHCP client is to be

 

 

 

 

triggered to obtain an IP address for this interface. If this is

 

 

 

 

configured as GS_FALSE and ‘etherIfIpAddress’ is not

 

 

 

 

configured, then management IP traffic will not flow through

 

 

 

 

the interface. If an IP address is configured and ’modify’ is

 

 

 

 

done for this field, then ‘tEtherIfIpAddress’ and

 

 

 

 

‘tAggrIfNetMask’ fields shall be set to Zero (0.0.0.0). Both

 

 

 

 

Usedhcp and ‘tEtherIfIpAddress’ shall not be specified

 

 

 

 

 

 

 

 

324

IDL series User Guide