5.9.14ADSL ATUR Interval Commands5.9.14.1Get adsl atur interval

Description:

This command is used to get.

Command Syntax:

get adsl atur interval ifname <interface-name> [nintrvl <nintrvl-val>]

Parameters:

Name

Description

 

 

ifname

The ADSL interface name.

<interface-name>

Type : Get – Mandatory

 

Valid values: dsl-0dsl-23

 

 

nintrvl <nintrvl-val>

Number of 15 minutes intervals.

 

Type: Get Optional

 

Valid values: 1 - 96

 

 

Example:

$ get adsl atur interval ifname dsl-0 nintrvl 1

Output:

 

 

 

Ifname

 

: dsl-0

 

IntervalNumber

: 1

IntervalValidData : true

IntervalLofs(sec) : 10

IntervalLoss(sec) : 10

IntervalLprs(sec) : 10

 

IntervalLESs(sec) : 10

 

Output Fields:

 

 

FIELD

Description

 

 

Ifname

The IfIndex of DSL port

 

IntervalNumber

Count from 1 through 96 of 15 minute intervals. Performance Data Interval number 1 is the

 

most recent previous interval; interval 96 is 24 hours ago.

IntervalValidData

This variable indicates if the data for this interval is valid.

IntervalLofs(sec)

Count of seconds in the interval when there was Loss of Framing.

IntervalLoss(sec)

Count of seconds in the interval when there was Loss of Signal.

IntervalLprs(sec)

Count of seconds in the interval when there was Loss of Power.

IntervalESs(sec)

Count of Errored Seconds in the interval. The errored second parameter is a count of

 

one-second intervals containing one or more crc anomalies, or one or more los or sef defects.

IP DSLAM

263