Mask | This parameter specifies the network mask configured for the interface. | ||
| This is given in conjunction with IP Address configured and shall be | ||
| given only if IP address has been given. This shall be removed whenever | ||
| IP Address is removed. ’Modify’ of network mask for an Ethernet | ||
| interface shall be supported only if some IP address is configured on the | ||
| interface or 'etherUseDhcp' was configured to "GS_TRUE" previously. If | ||
| Usedhcp is GS_TRUE and ’modify’ is done for this field, then usedhcp | ||
| field shall be set to GS_FALSE. Both usedhcp and this field shall not be | ||
| specified together. |
| |
| Type : This field is not allowed when a physical interface is specified and | ||
| IP is 0.0.0.0. In all other cases the field is mandatory. | ||
| Valid Values | : 255.0.0.0 - 255.255.255.255 | |
| Default Value: None |
| |
|
| ||
usedhcp true false | This parameter specifies whether a DHCP client is to be triggered to | ||
| obtain an IP address for this interface. If this is configured as GS_FALSE | ||
| and ‘etherIfIpAddress’ is not configured, then management IP traffic will | ||
| not flow through the interface. If an IP address is configured and ’modify’ | ||
| is done for this field, then ‘tEtherIfIpAddress’ and ‘tAggrIfNetMask’ fields | ||
| shall be set to Zero (0.0.0.0). Both Usedhcp and ‘tEtherIfIpAddress’ shall | ||
| not be specified together. In case Iftype is ‘slave’, then this field can not | ||
| be set to GS_TRUE. |
| |
| Type | : Optional | |
| Valid value | : true or false | |
| Default value: false |
| |
|
|
|
|
speed {auto 100 BT | The Ethernet | speed | for the |
1000BT}+ | Type | : | Optional. |
| Valid Values | : auto, 100BT, 1000BT. | |
| Default Value : auto. |
| |
|
| ||
type uplinkdownink | This parameter specifies the type of the Ethernet interfaces. The Net is | ||
| towards the NET side (2 at most) and slave means the physical interface | ||
| connected to the slave device. | ||
| Type | : | Optional. |
| Valid Values | : uplink, downlink. | |
| Default Value : uplink. |
| |
|
| ||
enabledisable | Administrative status of the Ethernet interface. | ||
| Type | : Modify - Mandatory | |
| Valid values : enable or disable | ||
| Default value: enable |
| |
|
|
|
|
320 | IDL series User Guide |
|
|