5.25.10System Traps Commands

5.25.10.1Reset traps

Description:

Use this command to delete all trap logs.

Command Syntax:

reset traps

Mode :

super-user

Example:

$ reset traps

Output:

Set Done

Output Fields:

None

References:

get traps command.

5.25.11System Traps Log Table Commands

5.25.11.1Get traps

Description:

Use this command to get the listing of all Trap Log Table entries (tTraps) or the last few tentries (Traps). This command is not supported on a flashless system.

Command Syntax:

get traps [num-of-traps]

IP DSLAM

629