FallBack

This specifies whether fallback is to happen for aggregator interface,

 

when a link goes down. As fallback trigger leads to re-propagation of

 

protocol PDUs to the links based on the state of the links, this may be

 

enabled if re-propagation of protocol PDUs is required for immediate

 

restore of peer protocol state on uplink devices. If such a treatment is

 

not required and Protocol time out may only be trigger for

 

re-propagation, Fallback trigger should be disabled.

 

 

Caution:

zRedundancy aggregator shall not be created, if aggregator interface is not created or if LACP aggregator is created for the aggregator interface.

References:

zcreate aggr intf command

zget aggr intf command

5.4.8Redundancy aggrport list Commands 5.4.8.1 Get aggrport list

Description:

Use this command to get.

Command Syntax:

get rdncy aggrport list [aggrifname <interface-name>]

Parameters:

Name

Description

 

 

aggrifname

Index of the redundancy aggregator, for which layer2

<interface-name>

interfaces are associated. Valid Value is aggr-0

 

Type: Get -- Optional

 

Valid values: aggr-0

 

 

Example:

$ get rdncy aggrport list aggrifname aggr-0

IP DSLAM

151