5.24 SNTP Commands
5.24.1SNTP Cfg Commands
5.24.1.1Get sntp cfg
Description:
Use this command to get.
Command Syntax: get sntp cfg
5.24.1.2 Modify sntp cfg
Description:
Use this command to modify.
Command Syntax:
modify sntp cfg [enable disable]
Parameter:
NameDescription
This specifies whether the SNTP service is enabled or disabled. True means that SNTP is
enabledisable enabled and False means that SNTP is disabled. Type: Modify － Optional
Valid values: enable, disable
Example:
$ modify sntp cfg enable
Output:
Verbose Mode On/Off
Status : Enable
Output field:
NameDescription
This specifies whether the SNTP service is
Statusenabled or disabled. True means that SNTP is enabled and False means that SNTP is disab
IP DSLAM | 591 |
|
|