<atucintlmintxrate-val>

Also refer to 'adslAtucConfRateChanRatio' for information regarding

 

RADSL mode and refer to ATU-R transmit rate for ATU-C receive rates.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

atucfastmaxtxrate

Configured Maximum Transmit rate for 'Fast' channels, in bps. Also

<atucfastmaxtxrate-val>

refer to 'adslAtucConfRateChanRatio' for information regarding RADSL

 

mode and ATU-R transmit rate for ATU-C receive rates.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

atucintlmaxtxrate

Configured Maximum Transmit rate for 'Interleave' channels, in bps.

<atucintlmaxtxrate-val>

Also refer to 'adslAtucConfRateChanRatio' for information regarding

 

RADSL mode and ATU-R transmit rate for ATU-C receive rates.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

atucmaxintldelay

Configured maximum Interleave Delay for this channel. Interleave

<atucmaxintldelay-val>

delay applies only to the interleave channel and defines the mapping

 

(relative spacing) between subsequent input bytes at the interleaver

 

input and their placement in the bit stream at the interleaver output.

 

Larger numbers provide greater separation between consecutive input

 

bytes in the output bit stream, allowing for improved impulse noise

 

immunity at the expense of payload latency.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 255

 

 

type noChannel fastOnly

This object is used to configure the ADSL physical line mode.

interleavedOnly

Type:

Modify

--

Optional

fastOrInterleaved

 

 

 

 

fastAndInterleaved

 

 

 

 

 

 

atucgstxendbin

The highest bin number allowed for Tx signal.

<atucgstxendbin-val>

Type:

Modify

--

Optional

 

Valid values: 0x06 - 0xff

 

 

atucgstxstartbin

The lowest bin number allowed for Tx signal.

<atucgstxstartbin-val>

Type:

Modify

--

Optional

 

Valid values: 0x06 - 0xff

 

 

atucgsmaxbitsperbin

The maximum Rx number of bits per bin.

<atucgsmaxbitsperbin-val>

Type:

Modify

--

Optional

 

Valid values: 0 - 15

 

 

 

atucgsrxstartbin

The lowest bin number allowed for Rx signal.

<atucgsrxstartbin-val>

Type:

Modify

--

Optional

 

Valid values: 0x01 - 0x1ff

 

 

atucgsrxendbin

The highest bin number allowed for Rx signal.

 

 

 

 

 

284

IDL series User Guide