Valid values: False, True

 

 

psdmaskusfallbackenable

Conexant parameter used to enable Mask on Demand (MoD) fallback

False True

mode. When enabled, the system chooses MoD or the base ADSL2

 

depending upon the upstream rate. It is avaiable only for ADSL2 Annex

 

A.(length = 4 bytes)

 

 

Type:

Modify

--

Optional

 

Valid values: False, True

 

 

atucconfmaxnompsdds

This parameter specifies the maximum nominal transmit

<atucconfmaxnompsdds-val>

PSD(MAXNOMPSD) level during initialization and showtime. Value

 

depends on CO MIB element settings and near end transmitter

 

capabilities and is exchanged in the G.994.1 Phase. It is available only

 

for ADSL2/ADSL2plus. Value ranges from -60 to -40 in steps of 0.1

 

dBm/Hz.(length = 4 bytes)

 

Type:

Modify

--

Optional

 

Valid values: (-600) - (-400)

 

 

aturconfmaxnompsdus

This parameter specifies the maximum nominal transmit

<aturconfmaxnompsdus-val>

PSD(MAXNOMPSD) level during initialization and showtime. Value

 

depends on CO MIB element settings and near end transmitter

 

capabilities and is exchanged in the G.994.1 Phase. It is available only

 

for ADSL2/ADSL2plus. Value ranges from -60 to -38 in steps of 0.1

 

dBm/Hz.(length = 4 bytes)

 

Type:

Modify

--

Optional

 

Valid values: (-600) - (-380)

 

 

atucconfmaxnomatpds

This parameter specifies the maximum nominal aggregate transmit

<atucconfmaxnomatpds-val>

power(MAXNOMATP) level during initialization and showtime. Value

 

depends on CO MIB element settings and local capabilities and is

 

exchanged in the G.994.1 Phase. It is available only for

 

ADSL2/ADSL2plus. Value ranges from 0 to 25.5 in steps of 0.1

 

dBm.(length = 4 bytes)

 

Type:

Modify

--

Optional

 

Valid values: 0 - 255

 

 

aturconfmaxnomatpus

This parameter specifies the maximum nominal aggregate transmit

<aturconfmaxnomatpus-val>

power(MAXNOMATP) level during initialization and showtime. Value

 

depends on CO MIB element settings and local capabilities and is

 

exchanged in the G.994.1 Phase. It is available only for

 

ADSL2/ADSL2plus. Value ranges from 0 to 25.5 in steps of 0.1

 

dBm.(length = 4 bytes)

 

Type:

Modify

--

Optional

 

Valid values: 0 - 255

 

 

atucconfpsdmaskds

This configuration parameter defines that the downstream PSD mask

 

 

 

 

 

IP DSLAM

291