Default value: Resedential bridging

 

 

floodsupport enable disable

This specifies if the flooding has to be done for unknown unicast

 

packets for this vlan or not.The default value for this shall be taken

 

from enable when vlan is created. The unknown unicast packets

 

shall be flooded on all ports for a vlan if global value (present

 

inDot1dTpInfo) is enabled or throttle, and the value pervlan is also

 

enabled else dropped.

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value: enable

 

 

bcastsupport enable disable

This specifies if the broadcast has to be done for this vlan or not.

 

The default value for this shall be taken from enable when vlan is

 

created. The broadcast packets shall be flooded on all ports for a

 

vlan if global value (present in Dot1dTpInfo) and the value per vlan

 

are both enabled else dropped.

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value:enable

 

 

resvmacprofileid

The Profile associated with this Vlan to be used to determine the

<resvmacprofileid-val>

behavior for Reserved Mac destined frames. Reserved Mac

 

addresses are the multicast addresses defined as reserved in

 

IEEE 802.1Q and IEEE 802.1ad. The existence of the specified

 

"ResvdCtlPktProfile Table" entry is a must for VLAN static entry

 

creation to succeed. Further, even if the specified

 

"ResvdCtlPktProfile Table" entry exists, but the corresponding

 

entry in "ResvdCtlPktProfile Param Table" is missing the packets

 

will be dropped. VLAN here means the 802.1q Vlan in case of

 

Native Vlan mode and Virtual Vlan in case of Stacked Vlan Mode.

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Valid values: 1 - 4

 

 

Default value: 1

 

 

 

 

igmpsnoopaction Drop

This parameter specifies that if an action is "Learn" then

TransparentlyForward Learn

igmpsnoop will be supported for this Vlan and an entry will be

 

learnt. Here action will be applied in conjunction with global

 

igmpsnoopStatus and port level igmpsnoopStatus flags, that is

 

IGMP functionality will be executed for a frame if IGMP is enabled

 

globally and on the port it has been received and for the vlan/virtual

 

vlan on which it has come.If action is "drop" then igmpsnoop

 

functionality is not supported for this vlan and IGMP frames shall

 

 

 

 

 

664

IDL series User Guide