permitted only if there is a Static VLAN Registration Entry for the

 

VLAN concerned, in which, the Registrar Administrative Control value

 

for this port is, Normal Registration.

 

 

GVRP PacketsPrio'

For the GVRP PDUs generated by the Control Plane, this priority shall

 

be used for choice of traffic class/ Queue on outgoing interface. In

 

case the bridge port is over an Aggregated ATM VC, this will also be

 

used to identify the VC, on which the packet is to be sent.

 

 

PS VLAN Index

Port service Vlan Index, the Service VLAN ID assigned to frames

 

received on this port. This is applicable only to Non-Provider ports.

 

The value zero here means that this field is not applicable. psvlanid

 

and ctosprofileid both can be non-zero. But they both can not be zero.

 

In case of bridge port on PPPoE and IPoE interfaces psvlanid value

 

must be non-zero, ctosprofileid is ignored for such a port. For other

 

bridge ports† psvlanid value can be zero. If both psvlanid and

 

ctosprofileid have non-zero value for such ports, the ctosprofileid shall

 

be applied and psvlanid shall be ignored

 

 

Port Provider Status

This specifies if the port is a provider port or a Non-Provider port as

 

per Vlan stacking model. This field is applicable only in Vlan stacking

 

scenario. The modification of this parameter is allowed only when the

 

bridge port is disabled. If the value of this field is

 

GS_STATE_ENABLE i.e the port is a provider port, then Priority of the

 

incoming C-Vlan tag is kept preserved irrespective of

 

gsvSVlanCvlanQosPreserveMode of the Svlan to which the packet

 

belongs to.

 

 

CtoS Profile Id

This specifies the CtoS profileId for the Vlan Map profile associated†

 

with this interface. Value zero for this means no CtoS profile

 

associated with this port.† psvlanid and ctosprofileid both can be

 

non-zero. But they both can not be zero. In case of bridge port on

 

PPPoE and IPoE interfaces psvlanid value must be non-zero,

 

ctosprofileid is ignored for such a port. For other bridge ports†

 

psvlanid value can be zero. If both psvlanid and ctosprofileid have

 

non-zero value for such ports, the ctosprofileid shall be applied and

 

psvlanid shall be ignored.

 

 

References:

gvrp commands

IP DSLAM

653