Modify － Optional

 

 

Default value: Normal

 

 

 

enable disable

Administrative status of the interface

 

Type: Optional

 

 

Valid values: enable or disable

 

 

Default Value: enable

 

 

 

pktpriority

Priority to be set in tagged PPPOE frames or

<pktpriority-val>

PPP packets sent over this port

from Control

 

Plane .This priority shall also be used for choice of

 

traffic class/ Queue on outgoing interface whether

 

the frame is tagged or not.In case the bridge port is

 

over an Aggregated ATM VC,

this will also be

 

used to identify the VC, on which the packet is to

 

be sent.

 

 

Type: Create － Optional

 

 

Modify － Optional

 

 

Valid values: 0 – 7

 

 

Default value: 0

 

 

 

 

Example:

$ create pppr intf ifname pppr-0 lowif aal5-0 maxPdu 1484 ppprAckTO 10 lowifToggleTimerTO 10 nature dynamic configstatus Normal

Output:

Verbose Mode On

Entry Created

Ifname

: pppr-0

Low IfName

: aal5-0

Max PDU Size

: 1484

Ter Ack TimeOut : 10

Lowif Toggle TimeOut : 10

 

 

Nature

: dynamic

Config Status

: Normal

Operational Status

: up

Admin Status

: up

PPPOA PacketsPrio:2

Verbose Mode Off:

Entry Created

510

IDL series User Guide