
Description:
Use this command to modify
Command Syntax:
modify rl profile info profileid
Parameters:
Name | Description |
|
|
| |
|
|
|
|
|
|
profileid | Rate limiter's configuration profile identifier, | ||||
whichuniquely identifies the configuration profile. The | |||||
| configuration profile contains all parameters required | ||||
| for rate limiting algorithm to operate. | ||||
| Type: | Create | Mandatory | ||
|
| Delete | Mandatory | ||
|
| Modify | Mandatory | ||
|
| Get | Optional |
| |
| Valid values: 1 - 16 |
|
| ||
|
| ||||
rate | This field defines the committed information rate. If | ||||
| 'level' is 'packet'(1), the unit is packets per second. If | ||||
| 'level' is 'byte'(2), the unit is bits per second. | ||||
| Type: | Create | Optional | ||
|
| Modify | Optional | ||
| Valid values: 1 - | 100000000 | |||
| Default value: 100000000 | ||||
|
| ||||
mbs | This field defines the committed burst size. If 'level' is | ||||
| 'packet'(1), the unit is number of packets. If 'level' is | ||||
| 'byte'(2), the unit is number of bytes. | ||||
| Type: | Create | Optional | ||
|
| Modify | Optional | ||
| Valid values: 4 - 65535 |
| |||
| Default value: 65535 |
| |||
|
|
|
|
|
|
IP DSLAM | 549 |
|
|