'any'. This field and the next field specify a range of protocol

 

types, if 'prototypecmp' is either 'inrange' or 'exrange'.

 

Otherwise only this field is valid

 

 

End ProtoType

End PPP protocol type of the range of PPP protocol types.

 

This field and 'prototypefrom' specifiy a range of ppp protocol

 

types if 'prototypecmp' is either 'inrange' or 'exrange'

 

 

Protocol comparison

Protocol comparison type

 

 

Subrule Priority

This specifies the priority of the subrule. Based on this priority

 

value, the subrule is created in fast or slow memory. In case

 

priority is specified as 'asinrule', subrule priority will be same as

 

specified in the rule.

 

 

References:

zsee generic filter related commands

5.13.34Filter subrule TCP Commands5.13.34.1 Get Filter subrule tcp

Description:

Use this command to get.

Command Syntax:

get filter subrule tcp [ruleid <ruleid-val>] [subruleid <subruleid-val>]5.13.34.2 Create filter subrule tcp

Description:

Use this command to create.

Command Syntax:

create filter subrule tcp ruleid <ruleid-val>subruleid <subruleid-val>

[ srcportfrom <srcportfrom-val> ] [ srcportto <srcportto-val> ] [ dstportfrom <dstportfrom-val> ] [ dstportto <dstportto-val> ] [ srcportcmp eq neq lt leq gt geq any inrange exrange ] [ dstportcmp eq neq lt leq gt geq any inrange exrange ] [ subruleprio low high asinrule] [ transporthdr ethernet pppoe ]

IP DSLAM

439