5.12 EOA Commands

5.12.1EOA Commands

5.12.1.1Create eoa intf

Description:

Use this command to create an EoA interface towards the CPE side.

Command Syntax:

create eoa intf ifname <interface-name> lowif <low-interface-name> [pkttype {multicast broadcast unknown-unicast} + allNone] [fcs false true] [enabledisable] [inactivitytmrintrvl <inactivitytmrintrvl-val>] [m2vmacdbid <m2vmacdbid-val> none] [configstatus normal config]

5.12.1.2 Delete oea intf

Description:

Use this command to delete an EoA interface.

Command Syntax:

delete eoa intf ifname <interface-name>

5.12.1.3 Get eoa intf

Description:

Use this command to get information on a particular EoA interface, or on all the EoA interfaces.

Command Syntax:

get eoa intf [ifname <interface-name>]

5.12.1.4 Modify eoa intf

Description:

Use this command to modify the properties of an eoa interface.

Command Syntax:

modify eoa intf ifname <interface-name> [pkttype {multicast broadcast unknown- unicast} + all none] [fcs false true] [m2vmacdbid <m2vmacdbid-val> none] [enabledisable] [inactivitytmrintrvl

<inactivitytmrintrvl>]

328

IDL series User Guide