Type: Create － Optional

 

Modify － Optional

 

Default value:enable

 

 

enabledisable

Administrative Status of the interface.

 

Type: Optional

 

Valid values: enable or disable

 

 

Example:

$ create ipoe intf ifname Ipoe-0 lowif Ipoa-0 macaddrprof 1 ethpkttype Type2 inactivitytmrintrvl 10 routingstatus disable cfgmode Auto enable

Output:

 

 

Verbose Mode On

 

 

Entry Created

 

 

Ifname

: Ipoe-0

Low If Name : Ipoa-0

Mac Addr Prof

: 1

Eth Pkt Type : Type2

InActivity Tmr Interval : 10

 

RoutingStatus

: disable

 

Oper Status

: Up

Admin Status : Enable

Verbose Mode Off:

 

 

Entry Created

 

 

Output Fields:

 

 

 

FIELD

Description

 

 

 

 

 

 

Ifname

The IPOE Tunneling Interface.

 

 

 

 

Low If Name

This specifies the lower interface index.It contains the

 

 

ifindex of the IPoA interface.

 

 

 

 

Mac Addr Prof

Profile Id corresponding to the MAC address assigned to

 

 

this IPOE interface. This Profile is created using the

 

 

MacAddrProfileTable.

 

 

 

 

Eth Pkt Type

This specifies the type of the Packet.

 

 

 

 

InActivity Tmr Interval

This field specifies the time (in seconds) after which

 

 

interfaces shall be marked inactive, if there is no data

 

 

activity on this interface during this interval. This is used

 

 

only when the bit corresponding to "ConfigEntry" is set for

 

 

gsvIpoeConfigStatus field. A value of zero means the timer

 

 

is not running. In autosensing scenario, an inactive

 

 

interface is a candidate to deletion, if another protocol is

 

 

sensed on Atm Vc Interface on which this interface is

 

 

created

 

 

 

 

 

480

IDL series User Guide