Planet Technology IDL-2400, IDL-2401, IDL-4800, IDL-4801 manual 279

PM Conf PMSF				: idleop
Line DELT Conf LDSF				: inhibit
Curr Output Pwr(dBm/10)				: 10	DS Bin SNR Update	:
Enable
Bin Number		SNR Margin/bin
---------------------------------
[ 0] 16
Oper Status				: Up	Admin Status	:
Enable
Output Fields:
	FIELD		Description
	IfName		The interface name of the DSL port.
	Line Type		Line type used by the DSL port.
	Coding Type		Line coding type used by the port.
	GsUtopia L2TxAddr		UTOPIA Level 2 Tx address for a line.
	GsUtopia L2RxAddr		UTOPIA Level 2 Rx address.
	GsUtopia L2RxAddr2nd		Conexant parameter to set UTOPIA Level 2 Rx address for the
			secondary bearer channel in case of Dual Latency. (length = 4
			bytes)
	GsUtopia		Conexant parameter to set UTOPIA Level 2 Tx address for the
	L2TxAddr2nd		secondary bearer channel in case of Dual Latency. (length = 4
			bytes)
	Gs Clock Type		Indicates use of crystal or oscillator.
	Gs Action		Allows action on per-line basis.
	Trans Atuc Cap		Transmission modes that ATU-C is capable of.
	Trans Atuc Actual		Transmission modes
	Trans Atuc Config		The transmission modes that the ATU-C is capable of supporting.
			The modes available are limited by the design of the equipment.
			REFERENCE"Section 7.3.2 ITU G.997.1" (length = 4 bytes).
	GsDmtTrellis		Indicates whether trellis coding has been enabled or not.
	Trans Atur Cap		The transmission modes that the ATU-R is capable of supporting.
			The modes available are limited by the design of the equipment
			(length = 4 bytes).
	PM Conf PMSF		PM-related parameter used by ATU-C to force a change in the
			line state. (Not available for ADSL/ADSL2Plus)
	Line DELT Conf LDSF		The DELT-related parameter used by ATU-C to force the line into
			the loop diagnostics mode. (Not available for ADSL and
			ADSL2plus)
IP DSLAM						279