
RoutingStatus | This specifies if the IP Routing Lookup has to be done for |
| this interface. By default, for the downstream traffic |
| destined for IPOE interface, IP lookup is done based on |
| the downstream route configured for the IPOE interface.If |
| iproutingstatus is disabled, layer 2 lookup shall be used |
| instead, for forwarding the downstream traffic for this IPOE |
| interface. |
|
|
Admin Status | Administrative status of the interface. |
|
|
Oper Status | Operational status of the interface. |
|
|
Description:
Use this command to create.
Command Syntax:
create rid static ridDescription:
Use this command to delete.
Command Syntax:
delete rid static ridParameters:
Name | Description |
|
|
rid | RID refers to the Routing Information Database. This |
| database contains information about the routes in the |
| system. Each RID identifies a flow and defines route |
| related information for that flow. The RID defines a flow |
| based on the VLAN Id. The database can be of 2 types, |
| IRD (Independent Routing Database) where there are |
| more than one RIDs in the system and each RID defines |
| separate routes in context of itself. If VlanId <X> and RID |
| <X> have been created and the routing database is |
| configured for IRD, than routes in RID <X> shall define |
|
|
IP DSLAM | 481 |
|
|