5.13.21Filter rule entry Commands

5.13.21.1Get Filter rule entry

Description:

Use this command to get.

Command Syntax:

get filter rule entry [ruleid <ruleid-val>]

5.13.21.2 Create filter rule entry

Description:

Use this command to create.

Command Syntax:

create filter rule entry ruleid r<ruleid-val> [ action drop allow setprio sendtocontrol retagprio copytocontrol clfrdef gotonextrule forwardexit exprdef modifytos setbaclevel pktvlanid retagvlanid pktservicevlanid retagservicevlanid retagserviceprio ratelimiter Mirror ] [ description <description-val> ] [ priority <priority-val> ] [ status enable disable ]

[ statsstatus enable disable ] [ ruleprio low high ] [ ruledir in out ]

[ applywhenreq enable disable ] [ pkttype Mcast Bcast Ucast ] [ snooplevel interface bridge ] [ exprid <exprid-val> ] [ actionval <actionval-val> ]

[ actionmask <actionmask-val> ]

5.13.21.3 Delete filter rule entry

Description:

Use this command to delete.

Command Syntax:

delete filter rule entry ruleid <ruleid-val >

5.13.21.4 Modify filter rule entry

Description:

Use this command to modify.

IP DSLAM

383