other user defined flows are identified by filtering rules by

 

associating flow type with a rule action of type 'ratelimiter'.

 

 

Instance Id

This field identifies the Rate limiting instance.

 

 

Cautions:

zAn entry in this table shall not be applicable for a bridge port created over PPPOE and IPOE interface.

5.21.5Rl actionprofile info Commands5.21.5.1 Get rl actionprofile info

Description:

Use this command to get.

Command Syntax:

get rl actionprofile info [profileid <profileid-val>] [result conform exceed violate] [action drop allow sendtocontrol copytocontrol modifytos setbaclevel]

5.21.5.2 Create rl actionprofile info

Description:

Use this command to create.

Command Syntax:

create rl actionprofile info profileid <profileid-val> result conform exceed violate action drop allow sendtocontrol copytocontrol modifytos setbaclevel [actionval <actionval-val>] [actionmask <actionmask-val>] [description <description-val>]

5.21.5.3 Delete rl actionprofile info

Description:

Use this command to delete.

Command Syntax:

get rl actionprofile info profileid <profileid-val>resultconform exceed violate action drop allow sendtocontrol copytocontrol modifytos setbaclevel

542

IDL series User Guide