autoSupportedProtocols, its value will override.

 

Type: Create － Optional

 

Modify － Optional

 

Default value: none

 

 

autosensetriggertype

This field specifies at what time autodetection of Encapsulation type or

dynamic

higher protocol layers is to be done - all the time or only when

opstatechange

Operational Status of ATM VC is changed to UP. If its value is

 

'dynamic', then detection can happen anytime a packet is received. If its

 

value is 'opstatechange', then autodetection happens only when

 

Operational status of ATM VC changes to UP. This field is not valid if

 

encaptype is Ethernet.

 

Type: Create － Optional

 

Modify － Optional

 

Default value: dynamic

 

 

ctlpktgroupid

The Control packet instance group associated with this VC. The flows

ctlpktgroupid none

for this interface shall be mapped to control packet instances as

 

mapped for the flows corresponding to the groupid configured in ctrlpkt

 

group info command. If this group does not have entries for some of the

 

flows, then those flows shall be mapped to the ctlpktinstid of ATM port,

 

for which this VC is being created. If the group id is 0, then all the flows

 

shall be mapped to ctlpktinstid of ATM port, for which this VC is being

 

created.

 

Type: Create － Optional

 

Valid values: 0 -50

 

Default value: 0

 

 

Example:

$ create atm vc intf ifname aal5-0 lowif atm-0 vpi 10 vci 10 enable aal5 pvc a5txsize 1536 a5rxsize 1536 llcmux mgmtmode data autosupportedprot pppoa eoa autovcmuxforcedprot pppoa autosensetriggertype dynamic ctlpktgroupid none

Output:

 

 

 

 

 

Verbose Mode On

 

 

 

 

 

Entry Created

 

 

 

 

 

VC IfName

: aal5-0

Low IfName

: atm-0

VPI

: 0

VCI

: 35

 

 

Admin Status

: Up

Oper Status

: Down

Aal5 Tx Size

: 1536

Aal5 Rx Size

: 1536

 

 

AAL Type

: AAL5

AAL5 Encap

: llcmux

channel

: Interleaved

Last Change(sec) : 0

MgmtMode

: Data

Row Status

: active

 

 

 

 

 

 

IP DSLAM

 

 

 

167