Output: |
|
|
|
|
| ||
Max ATM Ports |
| : 48 | Max VC per Port |
| : 8 | ||
Max VCs |
| : 384 | Max OAM activities |
| : 10 | ||
Max RMON probes |
| : 20 | Bridging Mode |
| : | ||
Residential |
|
|
|
|
| ||
Max Multicast groups |
| : 256 | Max MAC addresses |
| : 4000 | ||
Max Hash buckets |
| : 8192 | Max Vlans |
| : 512 | ||
Max VlanId Value |
| : 4095 | Max num Static Mac Entries : 512 | ||||
Dev Capabilities |
| : IVL |
|
|
| ||
Max Num EOA Prio Qs |
| : 3 | Max Num Eth Prio Qs |
| : 8 | ||
Max High Prio Tree Nodes | : 100 | Max Low Prio Tree Nodes |
| : 200 | |||
Max Clfr Trees |
| : 63 | Max Clfr Profiles | : 63 | |||
Max In Rules |
| : 250 | Max Out Rules |
| : 50 | ||
Max In HighPrio SubRules : 100 | Max In LowPrio SubRules | : 300 | |||||
Max Out HighPrio SubRules : 50 | Max Out LowPrio SubRules | : 150 | |||||
Mcast Capabilities |
| : ivmcapable |
|
|
| ||
Max Access Concentrators | : 2 |
|
|
| |||
Max Src MAC Addresses | : 4 |
|
|
| |||
Vlan Mode |
| : 1 |
|
|
| ||
S Vlan Protocol Id |
| : 0x9100 | T Vlan Protocol Id | : 0x9200 | |||
T Vlan Id |
| : 1 |
|
|
| ||
AbondGlbCtrlVpi |
| : 0 | AbondGlbCtrlVci |
| : 20 | ||
AbondGlbSidFmt |
| : TwelveBitSID |
|
| |||
Ridcap |
| : srdcapable |
|
| |||
Output Fields: |
|
|
|
|
| ||
| FIELD |
| Description |
|
|
| |
|
|
|
|
|
|
|
|
| Max ATM Ports |
| Maximum number of ATM ports that can be configured |
|
| ||
|
|
|
|
|
| ||
| Max VC per Port |
| Maximum number of VCs possible per ATM port. |
|
| ||
|
|
|
|
|
| ||
| Max VCs |
| Maximum number of VCs possible in the system. |
|
| ||
|
|
|
|
| |||
| Max OAM activities |
| Maximum number of OAM activities that can be active at a time. |
| |||
|
|
|
|
|
| ||
| Max RMON probes |
| Maximum number RMON probes that can be applied |
|
| ||
|
|
| simultaneously in the system |
|
| ||
|
|
|
|
|
| ||
| Bridging Mode |
| This specifies the state of full bridging on the bridge. Value |
|
| ||
|
|
| residential species that packets coming from CPE side would be |
| |||
|
|
| forwarded to the net side port without a lookup. In case of |
|
| ||
|
|
| restricted bridging, the packets would undergo a lookup and if |
|
| ||
|
|
| the destination is another CPE port, the packet would be |
|
| ||
|
|
| dropped, i.e. CPE to CPE traffic is not allowed. Unrestricted |
|
| ||
|
|
| bridging is forwarding based on lookup in all cases. |
|
| ||
|
|
|
|
|
|
|
|
624 | IDL series User Guide |
|
|