5.6.7.3 Get bridge port intf

Description:

Use this command to get.

Command Syntax:

get bridge port intf [portid <portid-val>]5.6.7.4 Modify bridge port intf

Description:

Use this command to modify.

Command Syntax:

modify bridge port intf portid <portid-val> [ maxucast <maxucast-val> ]

[ learning enable disable ] [ status enable disable ] [ stickystatus enable disable ] [ fdbmodify enable disable ] [ aclglbdenyapply Enable Disable ] [ aclglbtrackapply Enable Disable ] [ proxyarpstatus enable disable ]

[ arptstatus Enable Disable ] [ darpstatus Enable Disable ] [ porttype trusted untrusted ]

Parameters:

Name

Description

 

 

portid <portid-val>

The bridge port id

 

Type: Modify －Mandatory

 

Get － Optional

 

Valid values: 1 - 578

 

 

ifname

Interface name associated with the Port,

<interface-name>

Type: mandatory,

 

Values: eth-*, eoa-*, pppoe-*, ipoe-*, vir-*

 

 

maxucast

This specifies the maximum number of unicast addresses, which can be

<maxucast-val>

learnt from this port. This is modifiable when the admin status of bridge

 

port is disabled. Max of number of unicast entries that can be

 

learnt/configured on a birdge port on CPE side is 128. The default value

 

for number of unicast entries that can be learnt or configured on a CPE

 

side bridge port is 16. Max of number of unicast entries that can be

 

learnt/configured on a birdge port on NET side is 4096. The default value

 

for number of unicast entries that can be learnt or configured on a bridge

 

port is 4096. Max of number of unicast entries that can be

 

learnt/configured on a birdge port on downlink side is 256. The default

 

value for number of unicast entries that can be learnt or configured on a

 

 

IP DSLAM

183