Chapter 10 - Conference Templates – Full Parameters View
Table 
Option | Description  | 
  | 
  | 
Line Rate  | Specify the transfer rate in Kbps.  | 
  | Video Switching - you must select the highest  | 
  | transfer rate common to all participants. For  | 
  | example, if two participants can connect at a transfer  | 
  | rate of 384 Kbps and one participant can connect at  | 
  | a transfer rate of 128 Kbps, set the Line Rate to 2B  | 
  | or 128 Kbps (2B in Bonding mode). In a conference  | 
  | with participants from mixed networks (ISDN and  | 
  | H.323), the line rate defined for the ISDN participant  | 
  | is the line rate that will be used for the H.323  | 
  | participant. The line rate currently supported for  | 
  | H.323 is E1. In such a rate, the number of H.323  | 
  | participants supported by the H.323 Network  | 
  | Interface module is reduced by half from 12 to 6  | 
  | participants.  | 
  | Transcoding and Continuous Presence - the line | 
  | rate has to be defined for each of the participants  | 
  | separately. The settings in this field apply only to  | 
  | those participants whose Line Rate was set to Auto.  | 
  | In such a case, set the conference line rate to the  | 
  | highest transfer rate common to all participants.  | 
  | Maximum transfer rate in Transcoding and  | 
  | Continuous Presence modes is 1920 Kbps (E1).  | 
  | Software Continuous Presence - the Line Rate is | 
  | set for conferences and represents the transmission  | 
  | rate from the MCU to the endpoint (combined video  | 
  | rate and audio rate). For more details regarding the  | 
  | Line Rate settings for Software CP conferences, see  | 
  | MGC Manager User’s Guide Volume II, Chapter 1,  | 
  | Version.  | 
  | Note:  | 
  | The high line rate transmission is enabled with the  | 
  | standard video card (version 1.43 and up) or with the  | 
  | Video+ card. The line rate of incoming ISDN/H.323  | 
  | calls can be automatically detected and the  | 
  | participant can be connected according to his/her  | 
  | capabilities, without prior setting of the endpoint’s  | 
  | line rate during conference setup. In such a case,  | 
  | the conference Line Rate is the maximum rate for  | 
  | the participant connection.  | 
  | 
  |