Polycom 8 manual

MGC WebCommander User’s Guide

The Conference Properties - Meeting Me Per Conference window opens.

In this window you assign dial-in numbers to the conference. Callers wishing to participate in such a conference must dial one of the dial-in numbers, and will be automatically connected to the appropriate conference. The conference participants do not have to be defined prior or during the conference settings – they are automatically detected and are assigned the conference parameters. Using this mode, any participant who dials the conference number can connect to the conference until all the MCU resources are utilized, or the maximum number of participants is reached.

When the participant connects to the conference, all the channels with the same CLI number are identified as pertaining to the same participant. In H.221, all the channels must have the same CLI number (applicable to 2B only). In BONDING, this rule is not relevant, and each incoming call is identified as a new participant.

The definition of a Meeting Room conference is based on the “Meet Me Per Conference” settings with additional, specific parameters. Make sure that the Auto Terminate option in the Advanced window is checked and that the parameters are set accordingly.

10-39