MGC WebCommander User’s Guide
Table
Option | Description |
|
|
Service Name | Type the name of the Network Service that will be |
| used to connect the participant to the conference |
| exactly as it is defined in the Network Service |
| function (the system is case sensitive). |
| If left blank, the default Network Service is used, |
| depending on the selected Connection Type. If the |
| selected Connection Type is ISDN, the default ISDN |
| Network Service is used. If the selected Connection |
| Type is ATM, the default ATM Network Service is |
| used. For more information on Network Services, |
| refer to the MGC Administrator’s Guide, Chapter 3. |
|
|
Enhanced Video | The MGC Manager can provide high quality video (30 |
| frames per second for incoming and outgoing video |
| streams) for line rates of up to T1/ E1 in Transcoding |
| and Continuous Presence conferences. This is done |
| by allocating two video codecs to the participant |
| instead of one. One of the video codecs is used for |
| encoding, while the other is used for decoding the |
| incoming video stream. |
| Select this check box to enable the high quality video |
| feature for the participant. |
| Note: |
| • To work with 30 frames per second the High |
| Frame Rate flag in the “system.cfg” must be |
| enabled in the MCU. |
| • To work with bit rates higher than 768 Kbps, the |
| High Bit Rate flag in the “system.cfg” must be |
| enabled in the MCU. |
|
|
