Polycom 8 The Participant Dialog Page opens, Define the parameters as detailed in Table, 4-20

Chapter 4 - New Meeting Window

The Participant Dialog Page opens.

2.Define the parameters as detailed in Table 4-3.

Table 4-3: Participant Dialog Page parameters

Option	Description
Name	The system displays the default name defined in the
	currently active Participant Default set.
	Type the participant name using numerals and
	characters. You may include spaces, dashes and
	underscores. Up to 80 characters may be used. Only
	one participant by this name may be defined for the
	conference.
Connection	You can set up conference dialing according to the
	following connection types:
	• Dial-in- The participant dials into the
	conference-MCU at conference time. The
	participant is identified by his/her CLI number
	(ISDN participant) or IP Address (IP participant).
	You inform the participant of the conference or
	MCU’s number to be dialed at the conference
	start time to connect to the conference. T1-CAS
	participants cannot be defined in advanced and
	they can only dial into Meet Me Per Conference,
	Meeting Room or Entry Queue Access
	conferences as undefined dial-in participants.

4-20