Polycom 8 manual Define the Advanced parameters as described in Table, 10-31

MGC WebCommander User’s Guide

5.Define the Advanced parameters as described in Table 10-4.

Table 10-4: Advanced Conference Parameters

Option	Description
Auto Termination	Select this check box to automatically terminate the
	conference by the MCU when:
	• No participant has connected to the conference
	during a predefined time period
	Or
	• All participants have disconnected from the
	conference and the conference is idle for a
	predefined time period
	Note:
	Make sure that the Auto Terminate parameters are
	set when defining a Meeting Room.
Minutes Before	This option is enabled when the Auto Termination
First Join	option is selected.
	Enter the number of minutes that should pass from
	the time the conference starts without any participant
	connecting to the conference, before the conference
	is considered as idle. If no participant has joined the
	conference during this period, it will automatically be
	terminated by the MCU.
Minutes After Last	This option is enabled when the Auto Termination
Quit	option is selected.
	Enter the number of minutes that should pass from
	the time the last participant disconnects from the
	conference, before the conference is considered as
	idle. If the conference remains idle and no other
	participant joins in during this period, the conference
	will be automatically terminated by the MCU.
Dial-Out Manually	Select this check box to designate an operator-
	controlled dial-out conference connection. If Dial-Out
	Manually is checked, the operator or meeting
	organizer must connect each of the dial-out
	participants.

10-31