Polycom RMX 1500, DOC2702A manual Default n

Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000

Table 22-2Manually Added System Flags – MCMS_PARAMETERS (Continued)

Flag	Description
MAX_TRACE_LEVEL	This flag indicates the debugging level for RMX support. The
	flag’s values have been modified for version 7.8 and is not
	backward compatible with previous versions.
	Possible values:
	From version 7.8 - TRACE = t, DEBUG = d, INFO_NORMAL
	= n, INFO_HIGH = i, WARN = w, ERROR = e, FATAL = f, OFF
	= o.
	From version 7.7 or lower - TRACE = n/a, DEBUG = n/a,
	INFO_NORMAL = n, INFO_HIGH = api, WARN = n/a,
	ERROR = crt, FATAL = n/a, OFF = no.
	Default: n
MAXIMUM_RECORDING_LI	The maximum number of Recording Links available for
NKS	selection in the Recording Links list and the Conference
	Profile - Recording dialog box.
	Range: 1 - 100
	Default: 20
MEDIA_NIC_MTU_SIZE	MTU size (Maximum Transmission Unit controls the maximum
	data payload size (bytes) transmitted in a single packet over
	the network.
	The RMX sends large amount of data over the network and
	may be required to adjust its MTU size according to the
	network environment in which it is deployed.
	MTU configuration is applicable to RMXs with RTM-LAN
	cards installed only.
	Default: 1500
MIN_H239_HD1080_RATE	Used to set the threshold line rate for HD Resolution Content :
	the line rate at which the RMX will send Content at HD1080
	Resolution. Setting the flag to 0 disables HD Resolution
	Content.
	Default: 768 kbps.
MINIMUM_FRAME_RATE_T	Low quality, low frame rate video is prevented from being sent
HRESHOLD_FOR_SD	to endpoints by ensuring that an SD channel is not opened at
	frame rates below the specified value.
	Range: 0 -30
	Default: 15
MIX_LINK_ENVIRONMENT	In H.239-enabled MIH Cascading, when MGC is on level 1,
	setting this flag to YES will adjust the line rate of HD Video
	Switching conferences run on the RMX 1500/2000/4000 from
	1920Kbps to 17897, 100bits/sec to match the actual rate of
	the HD Video Switching conference running on the MGC.
	Note: If the flag MIX_LINK_ENVIRONMENT is set to YES,
	the IP_ENVIRONMENT_LINK flag must be set to NO.

22-30 Polycom, Inc.