Polycom DOC2702A, RMX 1500 manual Possible values YES / no, 22-27

Chapter 22-System Configuration Flags

Table 22-2Manually Added System Flags – MCMS_PARAMETERS (Continued)

Flag	Description
FORCE_G711A	Setting this flag forces the use of the G711A Audio Codec.
	Possible values: YES / NO
	Default: NO
FORCE_RESOLUTION	Use this flag to specify IP (H.323 and SIP) endpoint types that
	cannot receive wide screen resolution and that were not
	automatically identified as such by the RMX.
	Possible values are endpoint types, each type followed by a
	semicolon. For example, when disabling Wide screen
	resolution in an HDX endpoint enter the following string: HDX;
	Note: Use this flag when the flag SEND_WIDE_RES_TO_IP
	is set to YES.
FORCE_STATIC_MB_ENCO	This flag supports Tandberg MXP mode of sending and
DING	receiving video by IP endpoint in HD 720p resolution and
	Video Quality set to Motion. This mode is not supported for
	ISDN endpoints.
	Default value: Tandberg MXP.
	To disable this flag, enter NONE.
G728_IP	Enables or disables declaration of G.728 Audio Algorithm
	capabilities in IP calls.
	Range: YES / NO
	Default: NO
G728_ISDN	Enables or disables declaration of G.728 Audio Algorithm
	capabilities in ISDN calls.
	Range: YES / NO
	Default: NO
H239_FORCE_CAPABILITIE	When the flag is set to NO, the RMX only verifies that the
S	endpoint supports the Content protocols: Up to H.264 or
	H.263.
	When set to YES, the RMX checks frame rate, resolution and
	all other parameters of the Content mode as declared by an
	endpoint before receiving or transmitting Content.
	Default: NO.
H264_BASE_PROFILE_MIN	Not supported from Version 7.0.2.
_RATE_CIF60_MOTION	Prior to Version 7.0.2, this flag set the minimum bitrate
	threshold for endpoints that did not support H.264 High Profile
	for CIF60 resolution using Motion Video Quality.
	Default: 256kbps
H264_BASE_PROFILE_MIN	Not supported from Version 7.0.2.
_RATE_HD1080P30_SHARP	Prior to Version 7.0.2, this flag set the minimum bitrate
NESS	threshold for endpoints that did not support H.264 High Profile
	for HD1080P30 resolution using Sharpness Video Quality.
	Default: 1536kbps

Polycom, Inc. 22-27