Appendix H-Setting the MCU for Integration Into Microsoft Environment
Polycom, Inc. H-43
CSR Method - Sending the certificate
After you have received the certificate from the Certificate Authority:
19 Open the Certificate Authority e-mail and Copy (Ctrl + C) the certificate information
from the Certificate Authority’s e-mail to the clipboard.
20 In the IP Network Service - SIP Servers dialog box, click the Send Certificate button.
The Send Certificate dialog box opens.
21 Click Paste Certificate to paste the clipboard content into the Send Certificate dialog box.
22 Click the Send Certificate button to send the certificate to the MCU.
23 Click the Close button.
24 In the IP Network Service - SIP Servers dialog box, complete the SIP Servers definitions.
25 Click OK.
The MCU validates the certificate.
—If the certificate is not valid, an error message is displayed.
If you have closed the IP Network Service - SIP Servers dialog box, repeat steps 1 to 11 in the
procedure "Defining a SIP Network Service in the MCU and Installing the Security Certificate” on
page H-37.