Polycom DOC2702A manual Deployment architecture includes, Company a, Company B, Polycom Equipment

Appendix I-Polycom Open Collaboration Network (POCN)

The deployment architecture includes:

Company A

For a full description of Company A’s deployment, see "Single Company Model - Polycom and Cisco Infrastructure” on page I-2.

Differing or additional configuration requirements for each element of this deployment model are listed below:

Table I-2Solution Architecture Components

Component	Version	Description
CISCO Equipment
CUCM	8.5	Cisco Unified Communication Manager:
		CUCM must be configured with a SIP trunk to the
		Service Provider’s SBC.
Polycom Equipment
MCU	7.6.x	MCU:
		MCU must be configured to send and receive RTP
		streams to and from the Service Provider's SBC.

Company B

Table I-3Solution Architecture Components

Component	Version	Description
CISCO Equipment
Endpoints		Endpoints should register with the Service Provider’s
		CUCM (or the local CUCM, if present).

Polycom, Inc. I-11